Works great!! I had to keep replacing the brand sensors. This works exactly as described...... great 👍
RIFE 150 PSI Pressure Sensor Transducer 1/8" NPT
RIFE
52-150PSI
RIFE - 52-150PSI
In Stock - More than 10 available
$118.99
$139.99
Black Friday Savings $21.00
Ships Today When Ordered Before 2pm CST
Racing Use Only, Not Legal for Road Use
RIFE Sensors are designed to perform in the harshest environments while delivering world class data and accuracy. These sensors are specifically designed to operate in the harsh environments found in drag racing, road racing, offroad racing, marine, street performance ,and more. RIFE sensors are machined, built and hand tested in the USA with extreme quality control to provide out of the box performance!
RIFE Pressure Transducer Features:
These screw in Pressure Transducers utilize the same state of the art proprietary sensor core used in our RIFE pressure blocks, with a specially designed body. These stainless sensor bodies hold the sensor core on an O-ring to better isolate the sensor from engine and road vibrations to create a more durable and dependable sensor.
This 5v style pressure transducer works great with Holley EFI, Haltech, Fueltech, MS3 Pro, Racepak, and more!
All RIFE Pressure Sensors are quality checked for functionality, sealing/leaks, and are held to accuracy of +/- .5% in order to provide the end user with the best possible data on the market!
These sensors utilize a standard 3 pin Delphi connector for utilization with all popular EFI harnesses. Connectors can be found below
Note this is a plug and play sensor sensor meaning connector is the same and no settings need changed in the ECU option for the following:
Flying Lead Option: Click Here
Crimp Connector Option: Click Here
RIFE pressure transducers have been tested and are compatible with Trans Fluid, Gasoline, Oxygenated Fuels, Methanol, Oil, Coolant, Water, Air, CO2, Brake Fluid and more!
*Note: Unlike most Motion Raceworks family of products, these sensors like most electronics are not 100% Made in the USA. While we diligently attempt to source all US electronic components, we have not been able to source everything domestically.
Add a male connector kit w/ pins
Crimp Terminal Kit: Click Here
Flying Lead Connector: Click Here

Because resolution of any particular sensor is limited to the amount of cells for data. Using too large of a psi sensor for your application can limit accuracy. For instance if you are limited to 16 cells, a 100 psi sensor will have closer increments in those cells compared to a 500 psi sensor, meaning 0-100 will provide tighter numbers across those 16 cells for reference voltage vs calibration. For this reason you want to use as small of a sensor as possible that the data can be below the ceiling. If you are measuring oil pressure for instance that will max out around 120 psi, a 150 psi sensor would be the perfect choice as it does not limit your max reading, but will have a much more accurate incremental vs a 200, 300, or even 500 psi sensor. Often times builders and racers will choose to use all 500 psi sensors, or all 300 psi sensors because it is convenient. While this may work, it will limit the accuracy if you are concerned with the data provided. RIFE sensors are true motorsports grade sensors with options of 60 psi, 100 psi, 150 psi, 200 psi, 300 psi, 500 psi, 1600 psi for options that more closely correlate with the source you are measuring than other sensor companies on the market. For all pressure range options: Click Here
Most pressure sensors used with aftermarket ECU’s utilize an 1/8” NPT male connection. RIFE Sensors screw in pressure sensors are 1/8” NPT as well making them a direct replacement and upgrade for other brands. There are a variety of ports on factory style engines like LS, LT, and Coyote that use a different thread pitch such as oil pressure locations. RIFE Sensors also carries adapters for different sizes, Click Here to shop these adapters that adapt to 1/8” NPT
Pre made harnesses found with aftermarket ECU like Fueltech, Holley, Haltech, HP Tuners, and many others use a standard Delphi GT style 3 pin pressure and map sensor connector. This makes our 52 series sensor the correct choice for these use cases: Click Here for a full list. However, some aftermarket and high end harnesses choose the premium DTM style 3 pin connector as it is a more durable, weather sealed, and high end connector for motorsports. These are our 53 series style sensors: Click Here to shop. Both the 52 and 53 sensors are identical in every way other than the connector for reference purpose.
Choosing the correct pressure range can be important for those who want accurate and concise data. All of our sensors are calibrated to +/- .5% which is some of the most accurate in the industry, this means if or when you replace a sensor it is as close to identical as possible so that you can actually compare and use data from one sensor to the next in case of a failure or issue. A good example means if you have a 100 psi sensor, and you are measuring a source that produces 70 psi, replacing this sensor means that the reading of the replacement sensor at 70 psi will be within .35 psi of the original sensor. This is important as many sensors on the market are only calibrated to +/-2% or higher. At a higher percentages like 2% you may see pressure inconsistencies of +/-1.5 psi which can prove an issue in certain conditions like dome pressure, and others as this discrepancy in psi grows in large psi sensors such as a 500.
All RIFE pressure sensors are .5 to 4.5v which means that they are a direct replacement for other .5v to 4.5v sensors with the same pressure ranges while providing all of the benefits RIFE sensors offers of a more accurate sensor, improved durability with its floating core design, and other unique design features.
Overall rating: 4.9 / 5 from 21 reviews.
Works great!! I had to keep replacing the brand sensors. This works exactly as described...... great 👍
Naylinden J. 5/5 Verified
Amazing products & customer service!!!
Luis F. 5/5 Verified
RIFE 150 PSI Pressure Sensor Transducer 1/8" NPT (PN 52-150PSI)
Awesome product! Kept blowing oil threw stock oil pressure sensors. One less problem for the track. Thank you
Joe B. 5/5 Verified
RIFE 150 PSI Pressure Sensor Transducer 1/8" NPT (PN 52-150PSI)
Great product
Joshua H. 5/5 Verified
Great Quality!
Tad T. 5/5 Verified
Customer service was great couldn’t ask for more parts where spot on
Shaun C. 5/5 Verified
Shipping was quick, packaging excellent and I got a sucker
Thomas D. 5/5 Verified
.
Neil R. 5/5 Verified
Excellent, quality sensor with true data.
Will R. 5/5 Verified
Easy to order, fast delivery. Thank you Doug!
Chris F. 5/5 Verified
Flawless
Alex M. 5/5 Verified
Great sensor, works flawlessly. We use all Rife sensors on all our builds.
Cicio Llc -. 5/5 Verified
Rife sensor fixed my fluctuating fuel pressure problem and Motion is the best ,staff and service.
James R. 5/5 Verified
Last one failed, it lasted 1 season. Hopefully this one last longer.
Ryan Z. 4/5 Verified
Great product 👌🏼
Luis R. 5/5 Verified
Exactly what I wanted and got to me quickly at a competitive price
Alvin P. 5/5 Verified
Mounted perfectly to my Aeromotive regulator and paired up with no issues to the Haltech ECU
Nathan L. 5/5 Verified
Best products
Faisal D. 5/5 Verified
.
Bryan S. 4/5 Verified
Excellent
Dominic B. 5/5 Verified
Awesome
Francis O. 5/5 Verified
