SBC 12AN Valve Cover Adapter Fittings for Push-In Grommet (Pair)
Motion Raceworks
34-00032
Motion Raceworks - 34-00032
In Stock - More than 10 available
Ships On Monday, When Ordered Before 2pm CST
$49.99
Racing Use Only, Not Legal for Road Use
Note: Grommets not included.
These fittings are designed to firmly push in to your valve cover grommets and adapt to 12AN. This allows for easy adapting to a standard AN style line for a cleaner and more aesthetic way of plumbing / routing to a catch can or other PCV device.
These are made to replace Mr. Gasket Part # 2054 or similar. Made to work with a 1.22" diameter hole in a valve cover.
These are Made in the USA from 6061 aluminum.
For 10AN fittings please visit the link below.
https://www.motionraceworks.com/products/10an-to-sbc-push-in-grommet-adapter
For our full line of catch cans and adapters please visit the link below.
Overall rating: 4.9 / 5 from 28 reviews.
The 12an push in fittings worked superb, I had a very cooperative representative.I am very inspired by Doug’s videos .He was the one to put me in the right direction with the catch cans for my blower motor Thank you ,and keep up the great work,I’m sure I will be ordering more merchandise in the future 😎👍💪
SBC 12AN Valve Cover Adapter Fittings for Push-In Grommet (Pair)
The push in -12 fitting makes it a lot easier for me, rather than welding in a fitting. I can use pre finished valve covers without harming the finish with welding. Demotion Derby engines, one -12 as a breather with a 90 degree push lock fitting and a piece of 3/4 heater hose ran down past the starter by the bell housing.
SBC 12AN Valve Cover Adapter Fittings for Push-In Grommet (Pair)
Well 1st, humans make mistakes and I made one! I bought the wrong size AN fitting, should have been a 10 but I didn’t have my glasses on so I picked a 12 instead. And I opened the package which after reading your policy, I cannot return it! So that is my dilemma.
SBC 12AN Valve Cover Adapter Fittings for Push-In Grommet (Pair)
Perfect fit
SBC 12AN Valve Cover Adapter Fittings for Push-In Grommet (Pair)
Fit good works excellent
SBC 12AN Valve Cover Adapter Fittings for Push-In Grommet (Pair)
I had nice billet aluminum breathers but because my FE Ford makes some blow by it would slobber oil on the valve covers then the headers and down the block making the bottom of the car a mess after a while and mark its spot. These valve cover adapters fit nice and tight in the grommets to keep them stable for a 12 AN 90° elbow and hose, which has a bit of weight to it. I was worried about them wobbling or leaning over in the grommets. No problem with these. They look great, the threads are perfect, no binding with the Russell fittings I used. Thank you for making a perfect solution for my situation.
SBC 12AN Valve Cover Adapter Fittings for Push-In Grommet (Pair)
They fit good. I'm at the track today and I will run it tomorrow hopefully no leak. Thanks guys as usuall quality parts.
SBC 12AN Valve Cover Adapter Fittings for Push-In Grommet (Pair)
The SBC 12AN Valve Cover Adapter Fittings for Push-In Grommet (Pair) 34-00032 worked perfect for my application and really seal well - no welding needed and you still have easy access to add oil when doing oil changes. Thanks again Motion Raceworks!
SBC 12AN Valve Cover Adapter Fittings for Push-In Grommet (Pair) 34-00032
Just what I needed to plumb CCV into the exhaust. Wish they were available in single. I only needed one.
SBC 12AN Valve Cover Adapter Fittings for Push-In Grommet (Pair) 34-00032
Great idea, well made and look great. These fit in a big block MoPar valve cover using Moroso grommets. Now I can finally hook up the catch can.
SBC 12AN Valve Cover Adapter Fittings for Push-In Grommet (Pair) 34-00032
They work great ,saves me from welding fittings on valve covers. I can use finished valve covers without affecting the finish.
SBC 12AN Valve Cover Adapter Fittings for Push-In Grommet (Pair)
Fitment was excellent. Well done for us cheap diy guys going a bit quick !
SBC 12AN Valve Cover Adapter Fittings for Push-In Grommet (Pair)
Always quality from motion.
SBC 12AN Valve Cover Adapter Fittings for Push-In Grommet (Pair)
Great product and great customer care
SBC 12AN Valve Cover Adapter Fittings for Push-In Grommet (Pair)
Great product and great customer care.
SBC 12AN Valve Cover Adapter Fittings for Push-In Grommet (Pair)
Great service and well made.
SBC 12AN Valve Cover Adapter Fittings for Push-In Grommet (Pair)
Nice part. Quick delivery
SBC 12AN Valve Cover Adapter Fittings for Push-In Grommet (Pair)
Works like a charm
SBC 12AN Valve Cover Adapter Fittings for Push-In Grommet (Pair)
Exactly what I needed.
SBC 12AN Valve Cover Adapter Fittings for Push-In Grommet (Pair) 34-00032
Very nice product. Quick shipping. Great sales& service!
SBC 12AN Valve Cover Adapter Fittings for Push-In Grommet (Pair) 34-00032
hard to find part that worked exactly like it is supposed to. Glad this grommet fitting was available so I did'nt have to weld on my new powder coated valve covers.
SBC 12AN Valve Cover Adapter Fittings for Push-In Grommet (Pair) 34-00032
Works Exactly as I expected! Thanks
SBC 12AN Valve Cover Adapter Fittings for Push-In Grommet (Pair) 34-00032
Excellent product!! Excellent buying experience! Will not hesitate to order from Motion! Thanks guys!
SBC 12AN Valve Cover Adapter Fittings for Push-In Grommet (Pair) 34-00032
Fit well, prompt service
SBC 12AN Valve Cover Adapter Fittings for Push-In Grommet (Pair) 34-00032
Very fast and professional course
SBC 12AN Valve Cover Adapter Fittings for Push-In Grommet (Pair) 34-00032
Nice worked great!
SBC 12AN Valve Cover Adapter Fittings for Push-In Grommet (Pair) 34-00032
fits perfect..
SBC 12AN Valve Cover Adapter Fittings for Push-In Grommet (Pair) 34-00032
Work awesome so far great product
SBC 12AN Valve Cover Adapter Fittings for Push-In Grommet (Pair) 34-00032
