Racecraft 300107 (93-02 Camaro) Ultra Lites 2" Drop Billet Spindle Medium Duty 4 Piston Front Brake Kit (5x4.75)

Medium Duty Drag Racing brake kits are the latest release from TBM brakes in its drag racing line. These brakes are the perfect balance of lightweight brakes with incredible stopping power that are up to the task of stopping heavier cars as well as high demand/high heat applications such as stock/super stock and bracket racing vehicles that do not tend to use a parachute and utilize the brakes more than a typical heads up car or vehicle that uses the parachute every pass. Thanks to a .350" thick Revolution rotor and F3 4 piston no drag technology caliper, these brakes are up to the task for the most extreme uses in drag racing!

TBM Brakes afford racers one of the lightest and highest performing brake setup on the market. These brakes have proven themselves in every realm from Top Fuel Dragsters to Hot Rod Drag Week and everything in between. TBM is quickly becoming the winning edge in brake system design. With a revolutionary design TBM Brakes has lower drag and friction than competitors. Lower rolling resistance means quicker ET and better overall performance as well as longer pad life.

Included in this kit:

• F3 4 piston calipers 002-0056SSP-1 / 002-0056SSP-2
• #1 compound standard track pads 6-0102W 
• 10.75 x .350" steel revolution rotors 3-1075345525
• Aluminum caliper mounting brackets 16-0277
• Aluminum 5 on 4.75 hubs 8-103A
• Timken bearing, races and seals
• 1/2 -20” wheel studs
• Mounting Hardware Kit 011-0277

For custom bolt pattern please contact us directly, otherwise OE factory bolt pattern will be issued.

*Please use red Loctite on all rotor bolts*

Install Instructions

We recommend using TBM DOT 5.1 Extreme 6 Brake Fluid for all TBM Brake Kits. You'll need at least 4 (12 oz) bottles of fluid when building and plumbing a new system that is empty.