Billet Fuel Sump -12 ORB Single Outlet by Motion Raceworks 27-160

Skip to product information
1of6
SALE

Billet Fuel Sump -12 ORB Single Outlet by Motion Raceworks 27-160

Motion Raceworks

27-160

 (26)

Motion Raceworks - 27-160

In Stock - 2 available

Ships Today When Ordered Before 2pm CST

$145.00

Starting at $13 /mo with
View full details

Racing Use Only, Not Legal for Road Use

Billet Fuel Sump -12 ORB Single Outlet 27-160

This fuel sump is designed to work with stock and aftermarket tanks which need to be retrofitted to have a sump added. Featuring a Machined billet body with an O-ring seal. This is designed so that you can drill/cut/hole saw a hole into a plastic or metal fuel tank on a flat surface and install without further fabrication or welding. 

Features:

  • Face Seal O-ring to Fuel Cell Surface
  • 12 ORB feed for large fuel demands
  • Internally Baffled
  • Installation without removing from vehicle is possible
  • Black Anodized body

 Add Fitting in Options Below

  • -8AN
  • -10AN
  • -12AN

*We recommend increasing return line and / or vent size whenever adding increased fuel flow through a factory tank. Please contact us for further guidance on sizing.*

*Note:  Please use caution when drilling or modifying fuel tanks. Sparks and fuel do not mix and can be flammable. Please verify system does not leak after installation before using.*

For fitment and dimensions please reference this drawing.

 

 

Customer Reviews

Overall rating: 4.8 / 5 from 26 reviews.

Customer photo review of Billet Fuel Sump -12 ORB Single Outlet by Motion Raceworks 27-160

Works and sealed up great but the screw that it came with the threads end about a half inch too short from being able to tighten together. Had to space the screw out quite a bit to get it tight enough which sucks for the look of it since I was in a rush to get the tank back in. Otherwise it works great.

Billet Fuel Sump -12 ORB Single Outlet by Motion Raceworks 27-160

Customer photo review of Billet Fuel Sump -12 ORB Single Outlet by Motion Raceworks 27-160

A 4th Gen Camaro has a flat spot in the bottom of the tank just below the stock fuel pump bucket. That’s the perfect spot for this part. I used a 2 7/8” hole saw and after I cleaned up the shavings, the sump just snapped in perfectly. The tank is thick enough that the alignment fingers do not align the top plate that secures the sump. It was easy enough to hold it straight and tighten it. Saved me from buying a new tank. Thanks!

Billet Fuel Sump -12 ORB Single Outlet by Motion Raceworks 27-160

Great product idea however you must be careful lining up tabs on the sump and the internal ring. If not lined up perfectly it will leak. Trying to line it up through a fuel cell and through a trunk floor was a little difficult.

Billet Fuel Sump -12 ORB Single Outlet by Motion Raceworks 27-160